SPECIFCATIONS EXP6 GT
Weight 2200 kg*
ATM 3000 kg
Axle Capacity 5200 kg
Length of Body 5000 mm
Total Length 6723 mm
Body Width 1920 mm
Height 2730 mm in max position
Height 2470 mm in low position
Body Ground Clearance 650 mm
Wheel Track 1690 mm
Maximum Tire Size 35 inch
* Weight fluctuates up/down depending on options and build selected. Each trailer is individually weighted.
Brakes Electric Drum Brakes (EU overrun brakes)
Suspension Adjustability 300mm
Body material 30mm thick closed cell composite. Certified Engineered, Epoxy bonded closed cell composite body.
Insulation R-value over 5.1
Water Capacity: 170L Internal body tank (more water storage available)
Chassis: Certified Engineered, Air-tight & sealed (no holes) painted black 125mm x 75mm with 2x recovery points and optional Warn winch.
Suspension: Certified Engineered, Bruder patented design, 12-inch adjustable wheel travel with correct geometry, 450 grade high tensile circular hollow section tapered suspension arms, 4x Bruder specific remote canister rose joint mono tube shock absorbers.
STANDARD BUILD EXP6 GT
Interior
Internal and external 240V and 12V power outlets
Internal fans (one front section and one rear section)
Air-conditioning
Full sized queen bed (1530mm x 2030mm) with LED reading strip lighting and storage and electrical charging ports beside bed
Internal HD television and external antenna
Marine grade stain and water resistant flooring
Internal fridge freezer and easy access to the kitchen and pantry
Access to kitchen via premium roller doors
Stainless steel handles, fixtures and soft close cupboards for storage located under bed, on walls, beside bed head and in the main entry way
Diesel powered internal heating and hot water
Kitchen
Premium induction cooktop accessible inside or outside
Stainless kitchen sink with hot and cold water incorporating a filtered drinking water outlet
External 60L fridge/freezer located in front slideout storage area, including drawers and storage bin
Drop down table
Chassis & Suspension
125x75x4mm main chassis rails with internal and external support brackets
Fully welded and sealed laser cut duragal sections
Primed and painted in chip and scratch resistant liner
Chassis design includes rear winch compatibility and two rear tow recovery points
Bruder Design air suspension system with eight mono-tube remote-canister shock absorbers.
Engineered epoxy-bonded closed cell composite body construction with wall thickness paired to provide maximum strength and durability
Insulation R-value: Over 5.1
Inherent roof strength for heavy snow loads
Plumbing
170L drinking water tank located inside EXP body
Water pump pressuriser
Water filter
Internal and external hot/cold showers
Internal bathroom with vanity and toilet
Electrical
720 AH Lithium Battery
3000W Inverter
600W slim line roof mounted solar
120 Amp 220V charger
DC charger
MPPT solar charger and panel
Touch screen power management system
4x 12V and USB outlets
3x 110V/220V outlets
internal and external LED lighting including reading lights and rear door courtesy lights
4m electronically controlled side awning
RHS storage compartment light
Rear compartment 12V anderson plug input/ouput
The EXP6 is designed to be self-sufficient and operates all standard electrical items from its own 12v battery. Battery charging is via solar panels or when connected to a tow vehicle with the engine running. The EXP6 comes pre-equipped to connect to the battery charger if 110v, 220v or 240v battery charging is required.
Aditional Items
Fire extinguisher
4.5T McHitch Coupling / Alko off road EU ball coupling
Composite nose box storage compartment
Lighting to meet Australian & international standards
Spare wheel holder (one) including wheel
Internal pressuring fan (filtered air)
Four-wheel electric brakes
Premium double layered windows with block-out blinds and in-built mesh
Rear and side two-stage access doors
Under bed access and side storage compartments
Rear external storage area
Stone guard protection system
CONFIGUR YOUR BUILD
Add your custom options with the options configurator. Please note this is a configuration form only for your ease of use, its not an order form. You can use it any time to change and alter your configuration to your needs.